Time
aCCeSS play (continued)
N-ale:
aWhen no minutes are to be specified, for example, if play is to
begin at the 38.7 s. point of track 5, press the numeric button
“CS’ or press the asterisk button twice in a row, as shown below.
L
I
Press twice.
IW”
Restarting play from the same point of time
n Press the time recall button during play.
The selected starting time is displayed, the pickup moves to that
point and the unit pauses. Play commences from that point when
the play button is pressed.
Notes:
*To cancel the specified starting time, press the clear or stop
button.
61 new stating time cannot be specified by using the numeric
button(s) until the previous starting time is cleared.
2. To specify cue point
1
Press the memory button at any point during
play or pause mode which you later wish to
return to.
The cue point memory indicator illuminates, and the point at
which you pressed the memory button is entered into the
memory. (Play continues uninterrupted.)
2
Press the time recall button.
The pickup returns to the point in memory (the cue point) and the
unit pauses.
The pause indicator on the control panel illuminates.
3
Press the play button.
Play commences from the cue point.
Notes:
aTo cancel the specified cue point, press the stop or clear button.
Pressing the memory button again (during play or pause mode)
will specify a new cue point and cancel the previous cue point or
specified starting time.
*If an index skip button (on the remote control unit) is pressed
after a cue point is specified, the cue point play function may
not operate properly.
How to obtain accurate cue point settings
It is possible to obtain very accurate cue point settings by using
the dial search function described on page ‘20.
To Next Page
Loading...
Need help?
Power
Audio
Weight and Dimensions
