Network Meter Block Installation, Operation, & Maintenance Manual
Monitoring and Configuring the NMB 36
1. In the NMB’s dashboard, click . The Login pane opens.
2. Enter your login credentials and then click Login. The configuration area opens.
3. Select System Configure > Utilities and then click the Launch button.
4. In the Login pane, enter your login credentials again and then click Login. The Bootloader area opens.
4.4.2 Changing Your NMB’s Login Credentials
When shipped from the factory, the NMB is configured with generic login credentials. At a minimum, it is
recommended that you change these login credentials the first time you log into the NMB to improve your
network security.
To change your NMB’s login credentials, complete the following steps:
1. In the NMB’s dashboard, click . The Login pane opens.
2. Enter your current login credentials and then click Login. The configuration area opens.
3. Select System Configure > Utilities and then click the Launch button.
4. In the Login pane, click the Change Credentials button.
5. To change the username, complete the following steps:
a. In the Current Username field, type the NMB’s current username.
b. In the New Username, type the username you want to use. Usernames must be at least eight
characters and cannot include spaces.
c. In the Confirm Username, type your new username again.
6. To change the password, complete the following steps:
a. In the Current Password field, type the NMB’s current password.
b. In the New Password field, type the password you want to use. Passwords must contain:
• At least eight characters
• At least one uppercase letter
• At least one lowercase letter
• At least one number
• At least one special character (!, @, $, %, or *)
c. In the Confirm Password field, type your new password again.
Launching the Bootloader ceases the NMB’s monitoring functionality and de-energizes all outputs.
It is important to set a strong password; this password protects uploaded certificates and private
keys.
Launching the Bootloader ceases the NMB’s monitoring functionality and de-energizes all outputs.
To Next Page
Loading...
Need help?
General
