TechniSat DIGITRADIO 30

80
7.1.6 Manual seing
This menu item is used to check the reception channels
and can be used to select a beer position for the radio.
> Briefly push the MENU buon and select the
submenu [Manual seing].
> Select a station (5A to 13F) using the selection
knob.
The signal strength will now be shown on the
display.
If a DAB+ station is being received from a station,
the station ensemble name is displayed.
7.1.7 Deleting inactive stations
This menu item is for removing old stations and those no
longer being received from the station list.
> Push the MENU buon and select [Delete inactive
stations].
This is followed by the [Delete?] prompt asking if
the inactive stations are to be deleted.
> Select [Yes] and confirm to carry out the process.