90
12 System seings
All the seings referred to in this item are equally
applicable in DAB+ and FM mode.
12.1 Date and time seings
12.1.1 Manually seing the date/time
Depending on the seing for time updates (Section 12.1.2),
the date and time might have to be set manually.
> Push the MENU buon and select [Set date/time]
in the submenu [System] > [Date/Time].
> The first time digits (hours) flash and can be
changed and confirmed using the selection knob.
> The next time digits (minutes) start to flash and can
be changed in the same manner.
> To set the date, proceed in the same way as
described above.
Aer all seings have been made, [Time saved]
appears on the display.