TechniSat DIGITRADIO 30

82
8.3 Automatic station scan
> Push the selection knob to automatically search
for the next station with sucient signal strength.
If a FM station with sucient signal strength is
found, the scan stops and the station is played. If
an RDS station is being received, the station name
appears and, possibly, the radio text.
8.4 Manual station scan
> Turn the selection knob to set the frequency of the
desired station.
The display shows the frequency in steps of 0.05
MHz.
8.5 Scan seing
In this menu item it is possible to set the sensitivity of the
scan.
> Push the MENU buon and select [Scan seings].
> Select whether the scan should only stop for
stations having a strong signal [Strong stations
only] or for all stations [All stations].
With the "All stations" seing, the scan stops
automatically at each available station. This
can result in weak stations being played with
background noise.