93
DE
EN
FR
NL
12.3 Factory seings
If you change the location of the device, e.g. when
moving house, it is possible that the saved stations can no
longer be received. In this case you can reset the device
to factory seings to delete all the saved stations and
launch a new scan.
> Push the MENU buon and select [Factory
seings] in the submenu [System].
> Then confirm by selecting [Yes] or cancel the
process by selecting [No].
All previously stored stations and seings will now
be deleted. The device is now in the same status as
when delivered.
[Restart...] appears on the display while the device
is on standby. Aer you switch the device on again,
it automatically performs a full scan in DAB mode.
While scanning, the display information shows the
progress, as well as the number of digital radio
stations detected. Aer completing the station scan
the first DAB+ channel is played.
To Next Page
Loading...
