Techno CNC Systems 60120 - Page 61

61
Call: 1-631-648-7481 or Visit: support.technocnc.com
Titan Series WinCNC Manual
WinCNC
WinCNC Controller
WinCNC Users Guide Page 101
L251 Vector Laser On - L251 P# D# L#
Enables vector laser cutting.
P# - laser power (1-100).
D# - sets the distance for the distance based vector laser ring.
L# - sets the distance for the off signal when perforating.
L251.1 Laser Dwell - L251.1 D#
D# - time in seconds for dwell.
L252 Bitmap Engraving
L252.1 Stores rotation for future use.
L253 Bitmap Engraving rotated 90 degrees clockwise.
L253.1 Stores rotation for future use.
L254 Bitmap Engraving rotated 180 degrees clockwise.
L254.1 Stores rotation for future use.
L255 Bitmap Engraving rotated 270 degrees clockwise.
L255.1 Stores rotation for future use.
L256 Offset for bitmap engraving row alignment L256 R#
Offset on positive motions to compensate for laser ring delays to
line up bitmap rows during dual motion engraving.
R# sets the radius used for rotary engraving in the current unit of
measure.
L300 Lock Axis - L300 XYZW
Locks specied axis motion. Any motion commanded to a locked
axis will be ignored.
L301 Unlock Axis - L301 XYZW
Unlocks specied axis motion.
Command Reference