EXCITE/EXCITE+ LINE - ASSEMBLY KIT VISIO/VISIOWEB-UNITY3.0
Installation Manual UNITY 3.0- Rev. 1.0
e-mail: support@technogym.com
Pag. 31
WARNING: Ensure that the cable is long
enough to be connected to the Driver box.
9.Connect directly the connector of the High
Kit-Low Kit connection cable (Q) 0WCU0751xx
to the Driver Box.
In the ALEMET equipment, as shown in the
gure, it must be used the adapter alemet ca-
ble (also called emergency converter cable)
0WCU0799xx provided in the kit, between
the cable (Q) 0WCU0751xx and the Driver
Box.
To Next Page
Loading...
