Personal Selection TÜV: Service & Maintenance Manual - rev. 1.0
Page 6.4
Photo 6.3-4
Place a cloth between the frame and the
seat carriage, to avoid to scratch the
frame.
7. Back off the screw f and remove the guide g
sliding it out from behind.
8. Back off the nut h using a 17-gauge wrench,
locking the eccentric pin i using a 5-gauge
hexagonal T-wrench.
9. Remove the eccentric pin and the pulley
fixed on it.
10. Remove the seat, sliding it out from behind.
To Next Page
Loading...
