Technogym Personal Selection TUV - Weekly Maintenance Operations; Cleaning the Frame and Painted Parts; Cleaning the Chrome-Plated Parts

Personal Selection TÜV: Service & Maintenance Manual - rev. 1.0
Page 9.2
9.2. WEEKLY MAINTENANCE OPERATIONS
These operations can be carried out by the machine owner and do not require any
special skills.
The weekly machine maintenance operations consists of simple cleaning, lubrication and checking
the emergency stop to ensure the correct and safe functioning of the machine.
For the weekly maintenance operations, proceed as follows:
9.2.1. CLEANING THE FRAME AND PAINTED PARTS
1. Clean the frame and painted parts of the machine using a cloth moistened with Clean Well.
CAUTION: do not use alcohol, benzene, or chemical products in general.
9.2.2. CLEANING THE CHROME-PLATED PARTS
Do not carry out this test on the sliding bars of the weight stack.
1. Use a paper towel slightly dampened with ethyl alcohol to clean the chrome-plated parts of the
machine, removing dust and grime.
CAUTION: remove any surface rust spots with a metal scrubber.
2. If you expect the machines to remain unused for an extended period of time, we recommend
protecting the chrome-plated parts with a layer of liquid petroleum jelly applied to the surface.
Once you start using them again, clean the chrome-plated parts with a paper towel slightly
moistened with ethyl alcohol.