Technogym Skillmill - Page 63

▪ Disconnect the cable connecting the console - PC/power bank from the console MINI USB socket of
the console.
▪ Reconnect the external power supply (Connect version).
6.5.3 COMBO LIST
Thefollowingseingsarepossibleusingthekeycombinationsshown:
Command Response
LONG PRESS key 1 + key
Toentermeasurementunitcongurationmode
(metric or imperial).
LONG PRESS key 2 + key
Toenterscenariocongurationmode(calories
orwas).
LONG PRESS key 2 + key 3 ToenterWi-Ficongurationmodeviaapp.
LONG PRESS key 1 + key 2 + key 3
To enter brake table calibration mode. For the
details, see “6.7 Calibrating the brake table”.
LONG PRESS key
To access the software update procedure. For
the details, see “9.SWupdate”.
Table 58
Skillmill:
Technical Service Guide - Rev. 3.5
Page 63email: support@technogym.com