TECHVIEW QV-3034 - Playback Channel Selection and Controls

5.2.3.2 Channel Select
5.2.3.3
Time Axis setup, file clip and zoom in/out
1) The DVR
supports the processing control bar function when playing back record files shown as
Picture5-
19A (Up to 4 CH is available).
2) Click [ ] icon beside

Time Axis: defaulted to 24hours, and allow user select 2hours, 1hour, 30minutes or
user-defined.
Detailed operation is as follows:
Detailed operation is as follows:Detailed operation is as follows:
Detailed operation is as follows:
（
（（
（1）
））
）
Fixed time axit: If you select [ ] option, that means the processing control bar cover two
video content.
（
（（
（2）
））
） User-defined: s
elect [ ]option and move the cursor to processing bar to select start time
and/or end time (
that is to say
Now, the whole time axis equals the time quantum you just selected (shown as Picture 2
Picture 5-18
Click [Main MenuSearch
Record search]
to enter into the interface shown as Picture
5
-
18
Picture 5
Picture 5-
19A
12
Time Axis setup, file clip and zoom in/out
supports the processing control bar function when playing back record files shown as
19A (Up to 4 CH is available).
the processing bar to pop up the interface shown as Picture 5
Time Axis: defaulted to 24hours, and allow user select 2hours, 1hour, 30minutes or
Detailed operation is as follows:
Detailed operation is as follows:Detailed operation is as follows:
Detailed operation is as follows:
Fixed time axit: If you select [ ] option, that means the processing control bar cover two
elect [ ]option and move the cursor to processing bar to select start time
that is to say
,
click any points of the processing bar as start time and/or end time
Now, the whole time axis equals the time quantum you just selected (shown as Picture 2
Picture 5
Record search]
to enter into the interface shown as Picture
Then tick-
select the channel you want to playback;
and click [Play] button to enter into the playback
mode shown as Picture 5
Picture 5
-19A Picture 5-19A-
1
19A
-2
Picture
5
-
19B
User Manual
supports the processing control bar function when playing back record files shown as
the processing bar to pop up the interface shown as Picture 5
-19A-1.
Time Axis: defaulted to 24hours, and allow user select 2hours, 1hour, 30minutes or
Fixed time axit: If you select [ ] option, that means the processing control bar cover two
-hours
elect [ ]option and move the cursor to processing bar to select start time
click any points of the processing bar as start time and/or end time
),
Now, the whole time axis equals the time quantum you just selected (shown as Picture 2
-19-A-2.
Picture 5
-19
select the channel you want to playback;
and click [Play] button to enter into the playback
mode shown as Picture 5
-
19
1
19B