TECHVIEW QV-3039 - Mobile Set

Friendly Reminder:
1.
All the parameters you set are available only when you click [Apply] and after system are
restarted.
User need to change MAC address when there are multiple DVRs at the same local area network.
Details please refer to
section 5.6.2.5
5. The Subnet Mask,
gateway and DNS server should be consistent with your router’s configurations.
6. Input DNS address. Please check router firstly. The setting should be consistent with
7. Click [Apply] button
Now you could remotely visit the DVR via IP
http: // public net IP: HTTP
port (such as:
http: //intranet IP: HTTP
port (such as:
via DDNS and apply for free DDNS account from the websites:
5.2.4.2 Mobile Set
The DVR is currently compatible with mobile
operating systems
, Iphone and Black berry
Please follow below steps:
1、
Configure network parameters, details please refer to section 5.2.4.1.
2、 Configure mobile port no (s
uch as 19011);
Section 5.2.4.3.
3、
Save the parameters and exit Main Menu;
Picture 5-32
Picture 5-33
Picture 5-34
18
All the parameters you set are available only when you click [Apply] and after system are
User need to change MAC address when there are multiple DVRs at the same local area network.
section 5.6.2.5
-System Information.
gateway and DNS server should be consistent with your router’s configurations.
6. Input DNS address. Please check router firstly. The setting should be consistent with
Now you could remotely visit the DVR via IP
port (such as:
19010)
port (such as:
19010 - only use for Intranet)
（4）
When selecting 3G from the Type. Details please follow
below steps:
1、Input
Mobile Port(China Telecom:#777;Others: *99#)
2、
Click <Apply>. System will automatically capture IP.
3、
Enter IP address:web port to visit DVR remotely.
Under the above four net mode,
you
via DDNS and apply for free DDNS account from the websites:
www.3322.org
or
The DVR is currently compatible with mobile
phones running
Andriod,
, Iphone and Black berry
on 3G networks.
Configure network parameters, details please refer to section 5.2.4.1.
uch as 19011);
and the port need forward to router. Details please refer to
Save the parameters and exit Main Menu;
When selecting PPPoE f
rom
can input user name and password provided by
ISP and set
Media and HTTP port. And now you
can
visit your remote DVR by using the IP
address captured after registering a domain
name and HTTP po
rt and connect to your DVR
via public network.
When selecting Static from the Type, user can directly input
IP address, Subnet Mask, Gateway and
picture 5-32.
1. Set your net type to Static;
2. Set Client
port number (such as
need to be forwarded
to a router.
3. Input HTTP por
t number (such as
need to be forwarded to a router;
4.
Input a specified IP address
User Manual
All the parameters you set are available only when you click [Apply] and after system are
User need to change MAC address when there are multiple DVRs at the same local area network.
gateway and DNS server should be consistent with your router’s configurations.
6. Input DNS address. Please check router firstly. The setting should be consistent with
routers
When selecting 3G from the Type. Details please follow
Mobile Port(China Telecom:#777;Others: *99#)
Click <Apply>. System will automatically capture IP.
Enter IP address:web port to visit DVR remotely.
you
can visit your remote DVR
or
www.dyndns.org.
Andriod,
Windows Mobile, Symbian
and the port need forward to router. Details please refer to
rom
the Type, user
can input user name and password provided by
Media and HTTP port. And now you
visit your remote DVR by using the IP
address captured after registering a domain
rt and connect to your DVR
When selecting Static from the Type, user can directly input
IP address, Subnet Mask, Gateway and
DNS shown as below
port number (such as
19009), and the port
to a router.
t number (such as
19010), and the port
need to be forwarded to a router;
Input a specified IP address
to [IP address] column;