TECHVIEW QV-3039 - 6.3.3.5 Device

1、 Motion Detection:
allow you configure its <Sensitivity>, <Alarm out>, <Alarm record> and <Alarm
Capture> etc. Details setting should be consistent with DVR loca
2、 I/O Alarm:
allow you configure <I/O Status>, <Alarm output>, <I/O Alarm record> and <Alarm email>
etc. Details setting should be consistent with DVR loca
6.3.3.5 Device
Click <Device> to unfold
its sub
1、HDD: Allow
you check out HDD status and overwr
consistent with DVR local setting.
36
allow you configure its <Sensitivity>, <Alarm out>, <Alarm record> and <Alarm
Capture> etc. Details setting should be consistent with DVR loca
l setting (Shown as Picture
allow you configure <I/O Status>, <Alarm output>, <I/O Alarm record> and <Alarm email>
etc. Details setting should be consistent with DVR loca
l setting (Shown as Pic
its sub
-options: HDD and PTZ.
you check out HDD status and overwr
itten time shown as Pictur
e 6
Picture 6
-
2
4
Picture 6
-
2
5
P
icture
6
-
2
6
P
icture
6
-
2
7
User Manual
allow you configure its <Sensitivity>, <Alarm out>, <Alarm record> and <Alarm
l setting (Shown as Picture
6-25).
allow you configure <I/O Status>, <Alarm output>, <I/O Alarm record> and <Alarm email>
l setting (Shown as Pic
ture 6-26)。
e 6
-27. Detail setting should be