TECHVIEW QV-3039 - Alarm Set

2、Sub stream
(shown as Picture 6
3、Email setting:
Click [Email setting] option to allow you set alarm email configuration parameters shown
as Picture 6-
22. Detailed parameters should be consistent with DVR local setting
4、DDNS Setting
6.3.3.4 Alarm Set
Click <Alarm> option to unfold its sub
Picture 6
-
2
3
35
(shown as Picture 6
-
21): Relative parameters should be consistent with DVR local setting.
Click [Email setting] option to allow you set alarm email configuration parameters shown
22. Detailed parameters should be consistent with DVR local setting
Click <Alarm> option to unfold its sub
-
options: Motion, I/O Alarm shown as Pict
After user applies for DDNS service shown as Picture
6-
24, you could enable <DDNS> function under any
one network type mode (Static, DHCP and PPPoE).
Now you remotely visit the DVR through domain
name (http://domain
name: port No
should be consistent with DVR local setting.
Picture 6-21
Picture 6-22
User Manual
21): Relative parameters should be consistent with DVR local setting.
Click [Email setting] option to allow you set alarm email configuration parameters shown
22. Detailed parameters should be consistent with DVR local setting
.
options: Motion, I/O Alarm shown as Pict
ure 6-24.
After user applies for DDNS service shown as Picture
24, you could enable <DDNS> function under any
one network type mode (Static, DHCP and PPPoE).
Now you remotely visit the DVR through domain
name: port No
). Details setting
should be consistent with DVR local setting.