TECHVIEW QV-3039 - 6.3.2 Playback

6.3.2 Playback
Click [
] icon to enter into <playback> interface shown Picture 6
6.3.2.1 Record search
Firstly, select one day you want to check and tick
desire
to playback shown as Picture 6
Secondly, select record type (Normal record, Alarm record and All) and then click <
as Picture 6-
9. On the time axis, red part stand for alarm record, yellow stand for normal record
part stand for no record during this period.
31
] icon to enter into <playback> interface shown Picture 6
-7.
Firstly, select one day you want to check and tick
-
select <synchronous Playback> and the channels you
to playback shown as Picture 6
-8
Secondly, select record type (Normal record, Alarm record and All) and then click <
9. On the time axis, red part stand for alarm record, yellow stand for normal record
part stand for no record during this period.
Picture 6-7
Picture 6-8
Picture 6-9
User Manual
select <synchronous Playback> and the channels you
Secondly, select record type (Normal record, Alarm record and All) and then click <
> button shown
9. On the time axis, red part stand for alarm record, yellow stand for normal record
and original