Tecnam P2010 - Use of Performance Charts

Page 5 - 2
Section 5 - Performances
INTRODUCTION
2
nd
Edition, Rev. 0
1. INTRODUCTION
This section provides all necessary data for an accurate and comprehensive
planning of flight activity from take-off to landing.
Data reported in graphs and/or in tables were determined using:
 “Flight Test Data” under conditions prescribed by EASA CS-23 regulation
 aircraft and engine in good condition
 average piloting techniques
Each graph or table was determined according to ICAO Standard Atmosphere
(ISA - s.l.); evaluations of the impact on performances were carried out by
theoretical means for:
 Airspeed
 External temperature
 Altitude
 Weight
 Runway type and condition
2. USE OF PERFORMANCE CHARTS
Performances data are presented in tabular or graphical form to illustrate the effect
of different variables such as altitude, temperature and weight. Given information
is sufficient to plan the mission with required precision and safety.
Additional information is provided for each table or graph.