AFMS N°D03 FOR ALTERNATIVE AVIONICS CONFIGURATION
Section 4 – Normal procedures
PRE-FLIGHT INSPECTION
4. PRE-FLIGHT INSPECTION
Before each flight, it is necessary to carry out a complete aircraft check including a
cabin inspection followed by an external inspection, as below detailed.
4.1 CABIN INSPECTION
1. Aircraft documents (ARC, Certificate of Airworthiness, Noise certificate,
Radio COM certificate, AFM): check current and on board
2. Weight and balance: calculate (ref. to Section 6) and check within limits
3. Breaker: all IN
4. Safety belts: connected to hard points, check condition
5. Ignition key: OFF, key extracted
6. Master switch: ON
7. Voltmeter: check within the limits
8. Lights: all ON, check for operation
9. Annunciator panel: check all lights
10. Acoustic stall warning: check for operation
11. Master switch: OFF
12. Baggage: check first aid kit, ELT, fire extinguisher, luggage secured with
restraint net.
To Next Page
Loading...
