- 14-
Place the urine strips in the rack position noted in the figure above. Or strips
may be blocked.
4. KEY FUNCTIONS
Operation methods of the apparatus
Once the instrument is turned on and the self diagnostics is complete. Press to enter the
main operational menu. Press
to enter previous menu.
The Placement of Test Strip
4.1 Testing Strips
ATTENTION:
1) The apparatus shall be installed in a place satisfying the work requirements.
2) Clean the apparatus often with soft rags
3) Don’t disassemble it randomly.
4) Use clean sampling cup.
5) Use fresh urine sample.
6) Concentrated urine samples must be diluted.
7) The strip must be dipped completely into the urine, and dipping time in the urine shall be
strictly controlled at 2 seconds.
8) Results are best when being run at room temperature
9) It is forbidden to use any solution to clean and wash the screen. It shall be cleaned with
clean and soft dry rag or paper.
To Next Page
Loading...