3-7
3.2.3 Product Dismounting
Disassembly/assembly steps for various models of A510, as shown in following:
3.2.3.1 Standard type
(a) 220V 1-5HP/440V 1-7.5HP
Step 1: Loose screws Step 2: Disassemble external cover
Caution
For A510 wiring, it is not necessary to disassemble the digital operator. First to
loose screws of the external cover and take off the cover, then you can carry out the
wiring work to the internal terminals of the inverter.
• Models of 220V 1-25HP and 440V 1-30HP are plastic shell. It is suggested to loose
screws of the external cover and take off the cover. When wiring is completed,
assemble the external cover of terminals and fasten screws.
• Models of 220V 30HP-100HP and 440V 40~215HP are metal shell. It is suggested to
loose screws of the external cover and take off the cover. When wiring is completed,
assemble the external cover of terminals and fasten screws.
To Next Page
Loading...
