TECO A510-2001-H - 4.2 Parameters list; Parameter group; Parameter Attribute

4-9
4.2 Parameters list
Parameter group Name
Group00 Basic Function Group
Group01 V/F Control Function Group
Group02 IM Motor Parameter Group
Group03
External Terminals Digital Input/Output Function Group
Group04
External terminal analog signal input (output) function group
Group05 Multi-Speed Group
Group06 Automatic Programm Operation Function Group
Group07 Operation /Stop Function Group
Group08 Protection Function Group
Group09 Communication Function Group
Group10 PID Function Group
Group11 Auxiliary Function Group
Group12 Monitoring Function Group
Group13 Maintenance Function Group
Group14 PLC Setting Group
Group15 PLC Monitoring Group
Group16 LCM Function Group
Group17 Automatic Tuning Function Group
Group18 Slip Compensation Group
Group19 Frequency Wobble Function Group
Group20 Speed Control Function Group
Group21 Torque And Position Control Function Group
Group22 IPM Motor Parameter Group
Parameter Attribute
*1
Modifiable paramters in operation
*2
Unmodifiable parameters in communication
*3
When carry out the factory default setting, this parameter value(set by users) will not restore the factory default.
*4
Readable and unmodifiable parameter