6-7
6.4 Noise filter
A. Noise filter is used at the input side
. If you need to comply with EN 61800-3, A510 220V model requires being supported by
a special filter in application and built-in filter models can be selected for 440V.
Table 6.3 Noise filter for the input side
Inverter model Noise filter
Supply voltage HP Model Rated current Dimension Part Number
1HP/2HP FS32121-18-99 18 300*100*55 4KA53X077T01
1ψ220V
3HP FS32120-21-99 23 300*100*55 4KA53X078T01
1HP/2HP FS32125-10-99 11 250*45*70 4KA53X079T01
3HP/5HP FS32124-21-99 23 270*50*85 4KA53X080T01
7.5HP/10HP FS32123-40-99 42 250*85*90 4KA53X081T01
15HP FS32125-56-99 61 250*85*90 4KA53X082T01
20HP/25HP FS32125-79-99 86 290*95*90 4KA53X083T01
30HP/40HP FS32125-138-99 150 380*237.5*93 4KA53X084T01
50HP/60HP FS32125-211-99 232 380*237.5*93 -
75HP/100HP FS32125-312-99 343 380*237.5*93 -
3ψ220V
125HP/150HP
1HP/2HP/3HP FS32128-6-99 8 63.5*130*92 4KA53X085T01
5HP/7.5HP FS32127-18-99 19 85.5*140*91.2 4KA53X086T01
10HP/15HP FS32126-31-99 33 100.7*210*101 4KA53X087T01
20HP/25HP/30HP FS32126-58-99 63 117.7*265*129.3 4KA53X088T01
40HP/50HP/60HP FS32126-103-99 112 351.5*284*127.4 4KA53X089T01
75HP/100HP FS32126-165-99 181 380*237.5*93 -
125HP/150HP/175HP/215HP FS32126-328-99 361 380*237.5*93 -
3ψ440V
250HP/300HP/375HP
To Next Page
Loading...
