6-12
Fuse type： Please choose the semiconductor fuse comply with UL design.
Class CC,J,T,RK1 or RK5
Voltage Range: For 220V-class inverter, please use the fuse of 300V class
For 440V -class inverter, please use the fuse of 00V class
6.7 PG speed feedback card
The key point of the option card installation, please refer to the instruction manual of
each purchased card.
A. JN5-PG-O speed feedback card: Open collector speed feedback card:
. JN5-PG-O terminal specification
Terminal Name Description
Vcc
JN5-PG-O Card output power ; 12V/5V±5% ,
200mA(voltage is selected by the SW1)
GND Power and signal reference point
A, A\, B, B\, Z, Z\
Encoder input signal, A correct divider ratio output
requires a two-phase input.
Open collector input type
AO, AO\, BO, BO\, ZO, ZO\
A ,B phase divider ratio ouput, z phase output monitor,
Open collector output type, 24V, 200mA
E Ground terminal
. JN5-PG-O Wiring Example
To Next Page
Loading...
