1-4
Caution
¾ Do not touch the heating elements such as heat sink, braking resistor, etc.
¾ The inverter enables easily the motor rotes from low speed to high speed. Please
make sure the allowable range of the motor and the machine.
¾ When the product is supported by the use of the braking module, please pay attention
to related settings for operation.
¾ Inspecting the circuit board signal should be avoided when the inverter is in operation.
Warning
¾ Avoid electrical shock! The internal DC capacitor of the inverter discharges in 5
minutes after the power is cut off. Therefore, carry out disasemmbly/assembly or
inspection after 5 minutes when the discharge completes.
To Next Page
Loading...
