TECO L510S Series - Page 13

3-4
Frame 2. Mounting on a flat surface.
Din rail type installation：
Din rail kit includes a plastic adaptor plate as an attachment for the inverter base.
Refer to Diagram below:-
Din Rail Mounting & Dismounting as shown in the diagram below:-Use a 35mm Din Rail.
Plastic adaptor plate.
JN5-DIN-L02 (Frame 2 Din rail kit part number)
Mounting
Dismounting
Assembly:-
Disassembly:-
Plastic Adaptor plate
Snap hook
Middle Snap hook
Snap hook
Screw: M4