TECO L510S Series - 6.7 Communication options

6-4
 Applicable Conditions of JN5-CU
6.7 Communication options
(a) PROFIBUS communication interface module (JN5-CM-PDP)
For wiring example and communication setup refer to JN5-CM-PDP communication option manual.
(b) DEVICENET communication interface module (JN5-CM-DNET)
For wiring example and communication setup refer to JN5-CM-DNET communication option manual.
(c) CANopen communication interface module (JN5-CM-CAN)
For wiring example and communication setup refer to JN5-CM-VAN communication option manual.
(d) TCP-IP communication interface module (JN5-CM-TCPIP)
For wiring example and communication setup refer to JN5-CM-TCPIP communication option manual.
6.8 RJ45 to USB connecting Cable (1.8m)
JN5-CM-USB has the function of converting USB communication format to RS485 to achieve the inverter
communication control being similar with PC or other control equipment with USB port.
Exterior:
Connecting:
Inverter
Parameter Setting
of Keypad Display
Parameters
of Motor
Notes
Same series
Same horsepower
Can be copied Can be copied
Parameters can be copied from
old version to new version.
Same series
Different horsepower
Can be copied Can’t be copied
Parameters can be copied from
old version to new version.
Different series Can’t be copied Can’t be copied -