TECO L510S Series - 6.5 Braking Resistor

6-3
6.5 Braking Resistor
Inverter
Catalog Number of
Braking Resistor
Specification
Specification of Braking
Resistor
Braking
Torque
Minimum value
of Resistor
V HP KW
Number of Braking
Resistor
Qty (W) (Ω) (LxWxH)mm Qty
10%
ED
(Ω) (W)
220V
3Ph
5 4 JNBR-390W40 1 390 40
390W/40Ω(395x40x78)
1 119 17 1000
7.5 5.5 JNBR-520W30 1 520 30
520W/30Ω(400x50x100)
1 108 17 1000
10 7.5 JNBR-780W20 1 780 20
780W/20Ω(400x50x100)
1 119 11 1500
400V
3Ph
1 0.75 JNBR-150W750 1 150 750
150W/750Ω(251x28x60)
1 126 120 600
2 1.5 JNBR-150W400 1 150 400
150W/400Ω(251x28x60)
1 119 120 600
3 2.2 JNBR-260W250 1 260 250
260W/250Ω(274x40x78)
1 126 100 680
5 4 JNBR-400W150 1 400 150
400W/150Ω(395x40x78)
1 126 60 1200
7.5 5.5 JNBR-600W130 1 600 120
600W/130Ω(395x40x78)
1 102 43 1600
10 7.5 JNBR-800W100 1 800 100
800W/100Ω(535x60x110)
1 99 43 1600
15 11 JNBR-1R6KW50 1 1600 50
1600W/50Ω(615x60x110)
1 126 43 1600
※Note: Braking resistor : W= ( Vpnb * Vpnb ) * ED% / Rmin
1. W: The power consumption of braking action
2
. Vpnb: The voltage of braking action (220V=380VDC, 440V=780VDC)
3
. ED%: The effective period of braking action
4. Rmin: braking resistor minimum value (ohms)
6.6 Copy Unit(JN5-CU)
The copy unit is used to copy an inverter parameter setup to another inverter. The copy unit saves time in
applications with multiple inverters requiring the same parameter setup
Copy Unit (JN5-CU) dimensions