TECO S310+ Series User Manual

4-7
4.2 S310+ Programmable Functions List
Parameter group Parameter group description
Group 00
Basic Parameters
Group 01
External terminal digital signal input function group
Group 02
External terminal analog signal input function group
Group 03
Preset Frequency function group
Group 04
Start/Stop command group
Group 05
V/F command group
Group 06
Motor parameters group
Group 07
Protection function group
Group 08
Communication function group
Group 09
Reserved
Group 10
Assistant function group
Group 11
Keypad display group
Group 12
User parameter group
Group 13
Auto Run(Auto Sequencer) function group
Parameter Attribute
*1
Parameters can be changed during run operation.
*2
Parameters can not be changed during communication.
*3
Parameters will not reset to default during a factory reset (initialization).
*4
Parameters will be changed in reset mode.
*5
Only used for V/F control mode.

TECO S310+ Series Specifications

General

Brand	TECO
Model	S310+ Series
Category	Controller
Language	English