TECO S310+ Series User Manual

1-3
Danger

To avoid electric shock, do not take the front cover off when power is on.

The motor will restart automatically after stop when auto-restart function is on. In this case, use
caution while working near the drive, motor, or driven equipment.

Note: The stop push button and external stop command have no safety function.
For Emergency stop, it is necessary to use a correct latch type push button and an appropriate
circuit or devices to ensure safety.
Caution

Do not touch heat-generating components such as heat sinks and braking resistors.

The inverter can drive the motor from low speed to high speed. Verify the allowable speed
range of the motor and the load before operation.

Note the settings related to the braking unit.

Do not check signals on circuit boards while the inverter is running.
Caution
Allow
5 minutes
after
disconnecting
power before
disassembling or checking the components.
The
power led should not be illuminated.
1.5 During Maintenance
Caution
The Inverter can be used in environment in temperature range from14˚-104 (℉ -10-40 ) ℃
and relative humidity of 95%.
Inverter Disposal
Caution
 Please dispose of this unit with care as an industrial waste and according to your required local
regulations.
 The capacitors of inverter main circuit and printed circuit board are considered as hazardous
waste and must not be burnt.
 The Plastic enclosure and parts of the inverter such as the top cover board will release harmful
gases if burnt.

TECO S310+ Series Specifications

General

Brand	TECO
Model	S310+ Series
Category	Controller
Language	English