TECO S310+ Series - Page 55

4-33
Group5- V/F command group
05- 01 No-load Current of Motor (Amps AC)
Range
05- 02 Motor rated Slip Compensation
Range
【0.0 ~ 100.0】%
05- 03 V/f max voltage
Range 【400V:323.0 ~528.0】Vac
05- 04 Maximum Frequency
Range
【0.20 ~ 400.00】Hz
05- 05 Maximum Frequency Voltage
Range
【400V:323.0 ~528.0】Vac
05- 06 Medium Frequency2
Range
【0.10 ~ 400.00】Hz
05- 07 Medium Frequency Voltage 2
Range
【400V:323.0 ~528.0】Vac
05- 08 Medium Frequency1
Range
【0.10 ~ 400.00】Hz
05- 09 Medium Frequency Voltage 1
Range
【400V:323.0 ~528.0】Vac
05- 10 Minimum Frequency
Range
【0.10 ~ 400.00】Hz
05- 11 Minimum Frequency Voltage
Range
【400V:323.0 ~528.0】Vac
05- 13 Slip compensation Low-pass Filter time
Range
【0.05 ~ 10.00】Hz
1) 00-01=7, set the V/F pattern freely complying with 05-04～05-09 (Refer to following diagram)
(V)%
05
-
05 (Vmax)
05
-
09 (Vmid1)
05-11 (Vmin)
Hz
05-10 05-08 05-06 05-04 400.00
05
-
07 (Vmid2)