6-72
Press ‘SEL’
and ‘↑ ↓’
1. ID SET=00~99 ; I/O NUMBER=0~3
2. REMOTE I/O= N⇔M⇔S⇔N
3. BACK LIGHT ; C KEEP =
×⇔√
4. M KEEP; I/O ALARM =
√⇔×
OK Confirm the Edition Data
ESC 1. Cancel the setting when pressed ‘SEL’
2. Back to Main Menu
Note：
① When I/O LINK is selected, ID setting range is 0~7 , which should be continuous。ID=0default as
Master, ID=1~7 default as Slave
② When REMOTE I/O is selected，the distribution of the remote I/O is as follows:
Master Slave
Remote Input X1~X12
←
I1~I12
Remote Output Y1~Y8
→
Q1~Q8
(5) RTC Setting
RTC SET V3.0
YY . NN . DD
MO HH : MM
Now Press
SEL Begin to input parameters
Press ‘SEL’
+ ‘← →’
Move the Cursor
SEL then
↑ ↓
1. YY=00~99,NN=01~12,DD=01~31
2.MO⇔TU⇔WE⇔TH⇔FR⇔SA⇔SU⇔MO
3. HH = 00~23 or MM = 00~59
OK Save the Input Data
ESC
1. Cancel the Input Data when press ‘SEL’.
2. Back to Main Menu.
(6) ANALOG SETTING
A 1=GAIN : 010
Æ
GAIN (0~999)
OFFSET : + 00
Æ
OFFSET (-50~+50)
A 2=GAIN : 010
OFFSET : + 00
SG2 Version
To Next Page
Loading...
