TECO SG2 - Page 170

2.2 IO Link Function：
2.2.1 System setting：
2.2.1.1 Connected A and B lines of some (1~8)V-type SG2，as Figure2；
2.2.1.2 Setting N（No Remote IO）for the instance of all SG2’s menu SET--
REMOTE I/O；
2.2.1.3 Setting 00，01，02，… for the instance of each of SG2’s menu SET--ID
SET， ID must be a series number(0~7) and maximal is 07；
Figure2：IO Link communication connection
2.2.2 Example：
2.2.2.1 Connected A and B lines of 8 V-type SG2，as Figure2；
2.2.2.2 Setting 00 ~ 07 for each SG2’s ID number，and programming in SG2
Ladder as follows；
2.2.2.3 Programming SG2(ID＝7)，setting function block L1 working mode as
follows ：
V-SG2 A B
ID＝0
V-SG2 A B
ID＝1
V-SG2 A B
ID＝7
L1
M1
M2
M3
M4
M5
M6
M7
M8
I1
1
8 M01 08
L1
W57 64
When Run，Slaver display the I/O When Run Master display X/Y