Chapter 3: Menu reference > Option 14 Program Users
Challenger10 Administrators Manual 35
Using data from card history
At the Waiting For Card prompt, press [MENU*] to display the start of the card
history list.
No 1 27.0.0.0.25.0.6
* Next, # Enrol
Press [ENTER] to save the card bit data in the user record, and then return to the
Create User screen.
Alternatively, press [MENU*] to display the next record in the card history list until
you find the one you want.
If there are no more records the card history list the following screen displays.
End Of History
Press ENTER
Press [ENTER] to return to the Create User screen.
Manually entering card data
At the Waiting For Card prompt, press [ENTER] to display the card bits.
Card Bits: 0.0.0.0.0.0.0
Bits:
Enter the card bits (raw card data) in format xxx.xxx.xxx.xxx.xxx.xxx.xxx, where
each field is a number from 0 to 255. Press [ENTER] after each number to save
the data and move to the next field.
When the last field is populated, press [ENTER] to exit this user record, and then
return to the Create User screen.
Modifying a user
The process of modifying a user is similar to the process of creating a user,
except that each screen will display the previously-programmed values. If the
user already has card data that you need to change, you have the option of
deleting the card data and learning or manually entering new card data, starting
at the Waiting For Card prompt.
Card Bits: 27.0.0.0.25.0.6
*-Del
Press [MENU*] to erase the user’s card data and return to the Waiting For Card
prompt.
Alternatively, press [ENTER] to return to the Create User screen.
To Next Page
Loading...
