Tekram Technology DC-395U - Page 34

5. NETWARE DRIVERS
DC-395 Series User’s Manual
3434
DC-395U/UW/F or DC-315(U) PCI SCSI Adapter Driver For NetWare
V3.12/V4.xx/5.0
Version 3.0 February 22, 1999
Tekram Technology Co.,Ltd.
Auto-loading module NWPA.NLM
NetWare 3.12/4.x NetWare Peripheral Architecture NLM:NBI Aware
Version 2.33a July 31, 1998
Copyright 1991-1998,Novell, Inc. All rights reserved
HAM Auto-Scan is enabled
CDM Auto-Loader is enabled
Supported SLOT Options are : 3, 2
Select SLOT Option:3
When prompted for a slot number, accept the slot numbers displayed. This slot number is
SLOT and MAINBOARD dependent.
10. Write down the slot number for use *below and press <Enter> to proceed. In case
where two DC-395 series adapters are present in the system, the driver must be loaded
once for each card. Further along, the console screen will display the message: "Edit File
As Necessary: STARTUP.NCF". Modify the file as follows:
Load DC3x5.HAM SLOT=3 (Note: use the slot number *above)
Load DC3x5.HAM SLOT=2