DC-395 Series User’s Manual
4747
8. WINDOWS 95/98 DRIVERS
This chapter provides installation procedures for the DC-395 series Windows 95/98 drivers.
Windows 95/98 must first be installed before beginning this procedure.
There are three driver files under the \WIN95_98 directory on the driver diskette:
• TRM3X5.MPD: Windows 95/98 driver file
• TRM3X5.INF: Information file
• Readme.W98: Win98 readme file
8.1 New Windows 95/98 Installation
8.1.1 New Windows 95
This procedure installs the TRM3X5.MPD driver onto a Windows 95 system for all new
system installations. Use this procedure when initially upgrading to Windows 95. Windows
95 automatically adds the driver to the registry and copies the driver to the appropriate
directories.
1. Start the Windows 95 Setup according to the Microsoft instructions.
2. Open the Control Panel and double-click the System Icon.
3. Click the “Device Manager” Tab and double-click "Other Devices".
4. Select the "PCI SCSI Bus Controller" entry. Click the "Properties" button.
5. Click the “Driver” Tab and choose "Change Driver".
6. A"Select Hardware Type" dialog box appears. Double-click 'SCSI Controllers"
7. Click "Have Disk" and Insert the Tekram Driver diskette in drive A.
8. Specify the path as A:\Win95_98. Click "OK".
9. A"Select Device" dialog box shows "Tekram DC-395U/UW/F or DC-315/U PCI SCSI
Adapter". Click "OK".
10. A" PCI SCSI Bus Controller Properties" dialog box shows driver Files directory
:\Windows\SYSTEM\IOSBUSYS\Trm3X5.mpd" , and click "OK"
11. A "System Settings Change" dialog box appears. Remove the driver disk from the drive
and click on the “Yes” choice to restart the computer.
To Next Page
Loading...