Tekram Technology DC-395U

To Next Page

To Previous Page

5. NETWARE DRIVERS

DC-395 Series User’s Manual

3636

Load C:\NWSERVER\DC3X5.HAM

Loading module DC3X5.HAM

DC-395U/UW/F or DC-315(U) PCI SCSI Adapter Driver For NetWare

V3.12/V4.xx/5.0

Version 3.0 February 22, 1999

Tekram Technology Co.,Ltd.

Auto-loading module NWPA.NLM

NetWare 3.12/4.x NetWare Peripheral Architecture NLM:NBI Aware

Version 2.33a July 31, 1998

HAM Auto-Scan is enabled

CDM Auto-Loader is enabled

Supported SLOT Options are :3, 2

Select SLOT Option:3

When prompted for a slot number, accept the slot numbers displayed. This slot number is

SLOT and MAINBOARD dependent.

13. Write down the slot number for use *below and press <Enter> to proceed. In case

where two DC-395 series adapters are present in the system, the driver must be loaded

once for each card. Further along, the console screen will display the message: "Edit File

As Necessary: STARTUP.NCF". Modify the file as follows:

Load DC3X5.HAM port=E800 int=A

Modify to:

Load C:\SERVER.312\312PTD\NATIVE\START\NPAPATCH

Load C:\SERCER.312\MMATTRFX

 Load C:\SERVER.312\NBI31X

Load DC3X5.HAM SLOT=3 (Note: use the slot number *above)

Load DC3X5.HAM SLOT=2

Tekram Technology DC-395U - Page 36