Tekram Technology DC-395U - Existing 95 OSR2 System Installation

8. WINDOWS 95/98 DRIVERS
DC-395 Series User’s Manual
5050
12. A" Tekram DC-395U/UW/F or DC-315/U PCI SCSI Host Adapter" shows driver Files
directory :\Windows\SYSTEM\IOSBUSYS\Trm3X5.mpd", and click "OK".
13. A "System Settings Change" dialog box appears. Remove the driver disk from the drive
and click on the “Yes” choice to restart the computer.
8.2.2 Existing 95 OSR2 System Installation
1. Boot Windows 95.
2. Click Start. Move to Settings, Control Panel, and click.
3. Double-click on the System icon.
4. Click on the "Device Manager" tab.
5. Double-click on the "SCSI controllers" entry.
6. Select the "Tekram DC-395U/UW/F or DC-315/U PCI SCSI Host Adapter" entry. Click
the "Properties" button.
7. Click the "Driver" tab.
8. Click the "Update Driver" button.
9. "Update Device Driver Wizard" starts and provides several windows with choice,
Follow the steps below to correctly install the device driver for Windows 95.
10. After the Introduction window appears, Select "Yes (Recommended).."
11. Click "Next" and Insert the Tekram Driver diskette in drive A.
12. Click "Other Locations" and specify the path as A:\Win95_98
13. Update Device Driver Wizard dialog box shows "Windows found The following
update driver for the device : Tekram DC-395U/UW/F or DC-315/U PCI SCSI Adapter.
Click "Finish".
14. A" Copying Files screen" dialog box appears, Specify path as A:\Win95_98 and click
"OK"
15. A "System Settings Change" dialog box appears. Remove the driver disk from the drive
and click on the “Yes” choice to restart the computer.