Operating Basics
44 AFG3000 Series Quick Start User Manual
To Output a PWM Waveform
Follow these steps to output a PWM waveform.
Quick Tip
■ Refer to page 63 for an application example of pulse-width modulation.
1. Push the front-panel Pulse button, and
then push the Pulse Parameter Menu
bezel button to display the pulse
parameter setting screen.
2. Push the front-panel Modulation
button to display the PWM parameter
setting screen.
Select the PWM source.
3. Set the PWM frequency.
4. Select the Modulation Shape.
5. Set the Deviation (pulse width devia-
tion).
1
3
4
5
2
To Next Page
Loading...
