Tektronix AFG3000 Series User Manual

Operating Basics
AFG3000 Series Quick Start User Manual
59
Using the Security Menu
Use the Security menu to limit access to the following menus:
■ Firmware update
■ Service menu (Refer to the service manual for information about the service menu.)
Access Protection
The access protection is set to Off by default. To turn the access protection on, do the following steps:
1. Push the front-panel Utility button to
display the Utility menu, and then push
the -more- bezel button twice.
2. Select Security Menu.
3. Select Access Protection to display the
password input page.
4. Enter your password. Use the general
purpose knob to select the characters
and push the Enter Character bezel
button after each selection.
As you enter the characters of your
password, they are displayed as a
series of asterisks (*******) on the pass-
word input page.
If no specific password has been previ-
ously defined, use the default password
DEFAULT.
5. Select OK to turn the access protection
on.
NOTE. When Access Protection is on, the Change Password bezel button is disabled.
1
2
3
4
5

Tektronix AFG3000 Series Specifications

General

Brand	Tektronix
Model	AFG3000 Series
Category	Portable Generator
Language	English