The default password is "" (no password).
You cannot retrieve a lost password from any command interface. You can reset the password from
the front panel. Select MENU, then RESET-PASSWORD.
For information on the TSP commands, refer to localnode.passwordmode in the Model
2601B-PULSE Reference Manual.
To change the password:
1. Select Set Password.
2. In the Current Password box, enter the presently used password.
3. In the New Password and Confirm New Password boxes, enter the new password.
4. Select Submit.
Using the virtual front panel
The Virtual Front Panel page allows you to control the instrument from a computer as if you were
using the front panel of the instrument. You can operate the instrument using a mouse to
select options.
The virtual front panel operates the same way as the actual front panel except that you cannot switch
the instrument on or off with the power switch.
For information on the front-panel controls, see Instrument description (on page 3-1).
To use the virtual front panel, you can use any standard web browsers.
You can access the Virtual Front Panel from multiple interfaces and each interface can make
changes. You may need to refresh the browser to see changes made by another interface.
Figure 37: Virtual front panel
To Next Page
Loading...
Need help?
General
