Appendix H: List of Beta Commands and Features
Arguments:
<NR1> - Trigger
count value from 0 to 1,000,000 with a resolution of 1. The value
of 0 is equivalent to infinite.
Examples:
AFG:TRIGger:COUnt 0 sets the trigger count to infinite.
AFG:TRIGger:DELay
Description:
Sets the trigger interval for the AFG.
Conditions:
Beta Command, see conditions of use. Default setting is 0.0.
Group:
AFG
Syntax:
AFG:TRIGger:DELay <NR3>
AFG:TRIGger:DELay?
Arguments:
<NR3> - Trigger delay value from 0.0 to 85 with a resolution of 0.1E-9.
Examples:
AFG:TRIGger:DELay 0.0 sets the trigger count to 0.0.
AFG:TRIGger:INTerval
Description:
Sets the trigger interval for the AFG.
Conditions:
Beta Command, see conditions of use. Default setting is 1.0E-3.
Group:
AFG
Syntax:
AFG:TRIGger:INTerval <NR3>
AFG:TRIGger:INTerval?
Arguments:
<NR3> - Trigger interval value from 1.0E-3 to 500 with a resolution of 1.0E-6.
Examples:
AFG:TRIGger:INTerval 1.0E-3 sets the trigger count to 1.0E-3.
H-8 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
