Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
If the license c
urrently resides in the scope and the license does not also reside in
the module, the license is transferred from the scope to the module.
If the applica
tion module slot is empty, an error event is posted to the event queue
so indicating and no operation is performed.
If the licen
se resides in both the scope and the module, an error event is posted to
the event queue so indicating and no operation is performed.
If the licen
se resides in neither the scope nor the module, an error event is posted
to the event queue so indicating and no operation is performed.
Group
Miscellaneous
Syntax
APPLication:LICENSE:SLOT<x>:TRANSFER EXECute
Related Commands
APPLication:LICENSE:SLOT<x>:LOCation?,
APPLication:LICENSE:SLOT<x>:TYPe?
APPLication:LICENSE:SLOT<x>:TYPe? (Query Only)
This query returns the application license type of the module that is currently
inserted in the specified application module slot. If there is no application
module in the slot,
NONE is returned. < x> can be slot number 1-4 (1-2 for
MDO3000 models).
NOTE. In order to use many of the advanced oscilloscope features, you must
purchase an application module that contains a license. A license turns on a
feature that is already present in the firmware. The module can be inserted
into any of the four application module slots in the oscilloscope (two for the
MDO3000 series). While only four of the more than twelve physical application
modules available c an be supported at one time (or two for the MDO3000 s eries),
more than this number of applications can be used simultaneously: a license can
be transferred from the physical application module to an internal location within
the oscilloscope. Once a license has been transferred to an internal location, the
application that it enables can be used without the physical application module
being present; the physical application module can be removed, thus freeing up
a slot. However, the license then needs to be transferred back t o the physical
application module in order to use the license with another instrument.
Group
Miscellaneous
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-147

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English