Commands Listed in Alphabetical Order
Group
Bus
Syntax
BUS:B<x>:MIL1553B:SOUrce
{CH1|CH2|CH3|CH4|MATH|REF1|REF2|REF3|R EF4}
BUS:B<x>:MIL1553B:SOUrce?
Related Commands
BUS:B<x>:ETHERnet:PRObe
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:CONDition
TRIGger:A:BUS:B<x>:MIL1553B:CONDition
Arguments
CH1–4 specifies an analog channel as the source for differential input.
MATH specifies the math waveform as the MIL-STD-1553 bus source for
differential input
REF1–4 specifies a reference waveform as the source for differential input.
Examples
BUS:B1:MIL1553B:SOUrce ref4 specifies to use reference waveform 4 as
the source.
BUS:B1:MIL1553B:SOUrce? might return CH2, indicating that channel 2 is
the currently specified source.
BUS:B<x>:PARallel:BIT<x>:SOUrce
Specifies the bit source waveform for the parallel bus.
Conditions
Requires an MSO/MDO model, with the MDO3MSO option installed for the
MDO3000 series. The MSO4000B and MDO4000/B/C models can trigger on
parallel buses without an application module.
Group
Bus
Syntax
BUS:B<x>:PARallel:BIT<x>:SOUrce {CH1|CH2|CH3|CH 4|
D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11| D12|D13|D14|D15}
BUS:B<x>:PARallel:BIT<x>:SOUrce?
2-188 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
