Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Conditions
This command re
quires a DPO4COMP application module for 4000 series
models, and an MDO3COMP application module for MDO3000 series models.
Group
Bus
Syntax
BUS:B<x>:RS232C:PARity {NONe|EVEN|ODD}
BUS:B<x>:RS232C:PARity?
Arguments
NONe specifies no parity.
EVEN specifies even parity.
ODD specifies odd parity.
BUS:B<x>:RS232C:POLarity
This command specifies the polarity for the RS-232C bus.
Conditions
This command requires a DPO4COMP application module for 4000 series
models, and an MDO3COMP application module for MDO3000 series models.
Group
Bus
Syntax
BUS:B<x>:RS232C:POLarity {NORMal|INVERTed}
BUS:B<x>:RS232C:POLarity?
Arguments
NORMal sets the polarity to positive.
INVERTed sets the polarity to negative.
BUS:B<x>:RS232C:RX:SOUrce
This command specifies the RX source waveform for the RS-232 bus.
Conditions
This command requires a DPO4COMP application module for 4000 series
models, and an M
DO3COMP application module for MDO3000 series models.
Group
Bus
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-193

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English