Commands Listed in Alphabetical Order
Arguments
OFF sets the Res
ponse Header Enable State to false. This causes the oscilloscope
to omit headers on query responses, so that only the argument is returned.
ON sets the Res
ponse Header Enable State to true. This causes the oscilloscope
to include headers on applicable query responses. You can then use the query
response as a command.
<NR1> = 0 sets the Response Header Enable State to false; any other value sets
this state to true.
Examples
HEADER|:HDR OFF specifies that the oscilloscope omits headers on query
responses, so that only the argument is returned.
HEADER|:HDR? might return :HEADER 1 indicating that the oscilloscope is
including headers on applicable query responses.
HIStogram? (Query Only)
This query-only query returns all histogram parameters; it queries the state of
all histogram parameters that the user can set. This command is equivalent to
selecting Waveform Histograms from the Measure menu.
Group
Histogram
Syntax
HIStogram?
Related Commands
MEASUrement:METHod
Examples
HISTOGRAM? might return the histogram parameters as :HISTOGRAM:BOXPCNT
30.0000,25.1000,70.0000,75.2000;DISPLA Y LINEAR;STATE
1;FUNCTION VERTICAL;SIZE 2.0000;SOURCE CH1
.
HIStogram:BOX
This command specifies the histogram box coordinates in terms of source
waveform vertical and horizontal units.
Group
Histogram
Syntax
HIStogram:BOX <NR3>, <NR3>, <NR 3>, <NR3>
HISto
gram:BOX?
2-338 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
