Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Related Commands
HIStogram:BOX
Pcnt
Arguments
<NR3> is a floating point number that specifies the left position of the histogram
box in source waveform horizontal units.
<NR3> specifies the top position of the histogram box in source waveform vertical
units.
<NR3> specifies the right position of the histogram box in source waveform
horizontal units.
<NR3> specifies the bottom position of the histogram box in source waveform
vertical units.
Examples
HISTOGRAM:BOX 1E-9, 0.250, 2E-9, 0.500 defines the coordinates of the
histogram box in source waveform coordinates.
HISTOGRAM:BOX? might return :HISTOGRAM:BOX 1.0000E-09, 0.2500,
2.0000E-09, 0.5000
, which identifies the coordinates of the histogram box in
source waveform coordinates.
HIStogram:BOXPcnt
This command specifies the histogram box coordinates in terms of percentages
of the full screen extents of the source waveform. The arguments refer to the
left (percent of the horizontal screen extent), top (percent of the vertical screen
extent), right (percent of the horizontal screen extent), bottom (percentofthe
vertical screen extent). The valid range for these values is 0.0 to 100.0.
Group
Histogram
Syntax
HIStogram:BOXPcnt <NR2>, <NR2>, <NR2>, <NR2>
HIStogram:BOXPcnt?
Related Commands
HIStogram:BOX
Arguments
<NR3> is a floating point number th
at specifies the left position of the histogram
box in percentage coordinates. The default value is 20%
<NR3> specifies the top position
of the histogram box in percentage coordinates.
Thedefaultvalueis80%
<NR3> specifies the right posit
ion of the histogram box in percentage coordinates.
Thedefaultvalueis80%
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-339

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English