Commands Listed in Alphabetical Order
HIStogram:MO
De
This command selects the type of histogram to create or disables the histogram
display. The query form either returns the current histogram type or that the
histogram di
splay is disabled.
Group
Histogram
Syntax
HIStogram:MODe {HORizontal|VERTical|OFF}
HIStogram:MODe?
Related Commands
HIStogram:DISplay
Arguments
HORizontal enables a horizontally positioned histogram that shows time
distribution.
VERTical enables a vertically positioned histogram that shows a voltage
distribution, or another distribution such as amperes.
OFF disables the collection of the histogram measurement.
Examples
HISTOGRAM:MODE HORIZONTAL sets the type of histogram created to horizontal,
which displays a horizontally positioned histogram that shows time distribution.
HISTOGRAM:MODE? might return :HISTOGRAM:MODE OFF, indicating that the
histogram display is disabled.
HIStogram:SOUrce
This command sets or queries which source will be compared against the
histogram box when the histogram testing is enabled.
Group
Histogram
Syntax
HIStogram:SOUrce {CH1|CH2|CH3|CH4|MATH|REF1|CH2 |CH3|CH4}
HIStogram:SOUrce?
Related Commands
HIStogram:DISplay
Arguments
CH1–4> selects the analog channel waveform to use as the source for the
histogram. The x variable can be expressed as an integer ranging from 1 through 4.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-343
To Next Page
Loading...
Need help?
General
