Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
MASK:USER:LA
Bel
This command specifies a user-defined label for a custom mask.
Conditions
This command requires a DPO4LMT application module.
Group
Mask
Syntax
MASK:USER:LABel <QString>
MASK:USER:LABel?
Related Commands
MASK:CUSTom, MASK:USER:AMPLitude
Arguments
<QString> is a quoted string of up to 32 characters.
MASK:USER:RECOr
dlength
This command specifies the nominal record length to be used for pulse mask
testing with a user-defined custom mask.
A series of examples showing how to use mask commands for typical tasks
is included in an appendix. (See page E-1, Mask/Limit Command Sequence
Examples.)
Conditions
This command requires a DPO4LMT application module for 4000 series models,
and an MDO3LMT application module for MDO3000 series models.
Group
Mask
Syntax
MASK:USER:RECOrdlength <NR1>
MASK:USER:RECOrdlength?
Related Commands
MASK:CUSTom,
SAVe:MASK,
MASK:USER:TRIGTOSAMP
Arguments
<NR1> is an integer that sets the record length value to be used for pulse mask
testing of a user-
defined custom mask.
2-400 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English