Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Examples
MASK:USER:REC
Ordlength 5000
sets the record length for pulse mask testing
with a user-defined mask to 5,000.
MASK:USER:RE
COrdlength?
might return 5000, indicating that a record length
of 5,000 has been set.
MASK:USER{:SEG<x>|:MASK<x>} (No Query Form)
This command deletes the specified mask segment from the current mask segment.
There can be up to 8 segments.
A series of examples showing how to use mask commands for typical tasks
is included in an appendix. (See page E-1, Mask/Limit Command Sequence
Examples.)
Conditions
This command requires a DPO4LMT application module for 4000 series models,
and an MDO3LMT application module for MDO3000 series models.
Group
Mask
Syntax
MASK:USER{:SEG<x>|:MASK<x>} DELEte
Related Commands
MASK:CUSTom,
SAVe:MASK
Examples
MASK:USER:SEG3 DELEte deletes segment 3 from the current mask segment.
MASK:USER{:SEG<x>|:MASK<x>}:NR_Pt? (Query Only)
This query returns the number of points that make up the specified mask segment
of a user-defined custom mask. There can be up to 8 segments.
A series of examples showing how to use mask commands for typical tasks
is included in an appendix. (See page E-1, Mask/Limit Command Sequence
Examples.)
Conditions
This command requires a DPO4LMT application module for 4000 series mode
ls,
and an MDO3LMT application module for MDO3000 series models.
Group
Mask
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-401

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English