Tektronix MDO4000B Series

Commands Listed in Alphabetical Order
POWer:SWLoss
:CONDuction:ENERGY:MIN? (Query O nly)
Returns the minimum conduction energy for the switching loss calculation.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:SWLoss:CONDuction:ENERGY:MIN?
Examples
POWER:SWLOSS:CONDUCTION:ENERGY:MIN? might return
:POWER:SWLOSS:CONDUCTION:ENERGY:MIN 1 indicating that the
minimu
m conduction energy switching loss calculation is set to 1 J.
POWer:SWLoss:CONDuction:POWer:MAX? (Query Only)
Returns the maximum conduction power for the switching loss calculation.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:SWLoss:CONDuction:POWer:MAX?
Examples
POWER:SWLOSS:CONDUCTION:POWER:MAX? might return
:POWER:SWLOSS:CONDUCTION:POWER:MAX 1 indicating that the
maximum conduction power switching loss calculation is set to 1 W.
POWer:SWLoss:CONDuction:POWer:MEAN? (Query Only)
Returns the mean conduction power for the switching loss calculation.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
2-520 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual